Exclusive licensed manufacturer authorized by TAVRIDA ELECTRIC, we manufacture a Compact air insulated withdrawable MV switchgear – Based on vacuum switching technology, air insulation, digital protection, and arc-flash relays which is Type tested according to IEC 62271-200, MILEtype inherently saves the environment as it is SF6-free switchgear.

Power block assembled metal construction including all necessary mechanical interlocks with auxiliary wiring to be tailored by customer himself.

Vacuum C.B. with magnetic actuator can interrupt in 16ms (The fastest arc fault interruption in the industry).

Circuit breakers

The withdrawable Circuit breaker is based on a fixed type of TEL circuit breaker and control module, which includes two types of modules:

• ISM-switching modules (either LD or MD, Shell or HD types) used to close and open primary circuits,
• Control module (CM) used to provide control of ISM (close and trip operations) and to replicate the auxiliary interface of conventional CB.

MILE switchgear

Compliance with IEC 62271-200 to perform safer.

MILE is designed to meet the LSC2B-PM AFLR 31,5kA 1s classification as per IEC 62271-200.
The design is fully type tested to IEC 62271-200. The following type tests have been successfully passed:

• Short time and peak withstand current on primary circuits
• Short time and peak withstand current on earthing circuits
• Temperature rise and main circuit impedance
• Dielectric test on main and auxiliary circuits
• Making and breaking capacity of the circuit breaker within the panel
• Earthing switch making capacity
• Mechanical operations
• IP code
• Internal arc fault (IAC classified: AFLR, 31.5kA/1s)

Exceptional safety

In addition to IEC 62271-200 requirements, the application of TAVRIDA ELECTRIC VCB with MAGNETIC ACTUATORS in MILE provides unique and unrivalled safety features such as remote and safe manual closing of VCB with a palm-held manual generator and the fastest arc fault interruption in less than one cycle.

High operational reliability

• The robust enclosure, made of 2mm corrosive resistant hot-dip galvanized metal sheets with reinforced doors and a safety labyrinth allows fast and simple erection even on an uneven floor.
• A rivet nut design provides not only the rigidness of construction but also an opportunity to replace metal parts on site without the use of special tools.
• An emergency trip push-button is located in the center of the panel. It has a striking, protruding design protected against accidental operation. The trip button can be quickly spotted in an emergency.
• Large and clearly visible mechanical position indicators located in view of an operator allows him to positively identify the operating status of the draw-out unit, VCB and earthing switch. Each mechanical indicator abruptly changes its status so that it exactly corresponds to the status of the switching device. Mechanical position indicators are duplicated by electrical auxiliary contacts to provide electrical signals into secondary circuits.
• Lockable access to the VCB racking in/out mechanism by a metallic shutter prevents unauthorized operations and interlocks the VCB in the trip position prior to racking a draw-out unit.
• An LV plug interlock visually prompts an operator to connect the draw-out unit to secondary circuits before the compartment door is closed.
• Refined accessories, such as door hinges, handlebars, locks and electrical indicators and buttons withstand thousands of operations and guarantee the appearance of a beautifully crafted product.
• Minimum service checks on site. MILE is designed for a service life of at least 30 years. The VCB, earthing switch and cast resin insulation technology is considered virtually maintenance free, so the maintenance requirements are only related to periodical checks to make sure that the system operates correctly.

Greater application versatility

• The design of 12, 17,5 and 24kV panels is unified.
• Cassette and truck versions are available.
• Front or Front and Rear accessibility to the cable compartment
• Two sets of CTs and VT cassette placed in VCB or cable compartments.
• Panel width can be 600, 750 or 1000mm.

CBs Key Benefits:

• Environmentally friendly
  • The ISM does not use SF-6 insulation materials.
  • The CM and ISM modules are manufactured from environmentally friendly materials.
• High reliability
  • 50,000 CO operations at rated current and 100 full rated short-circuit operations without any maintenance make it the most reliable circuit breaker on the market.
• Lightweight and compact dimensions

The Fastest Arc Fault Interruption in less than one cycle:

An arc fault rapidly discharges significant energy, and the duration of arcing is crucial in mitigating damage and minimizing the risk of personal injury. The energy released during an arc fault is directly tied to the total clearing time. Despite enhancements in relay response times, the opening times of the VCB with a motor spring mechanism typically extend up to five cycles.

The range is ideally suited for all types of applications which call for :

• Reliable, safe, environmentally, and friendly switching medium (Vacuum)
• Interlock mechanisms to improve operation and safety.
• Signal outputs to monitor operation of the circuit breaker.
• The insulation system, operating mechanism and vacuum interrupter are maintenance free. No maintenance is needed at all.
• Compatibility with SCADA systems.